Drip Eze® Classic
Drip Eze® extruded in-line drip tube are precise, low flow irrigation products suited for a wide range of landscape applications, such as high density planting areas and intricately shaped beds, veggie and garden beds. The discreet brown tubing applies water at a slow consistent rate, minimising run-off and water wastage.
- Available in 4mm and 13mm sizes
- 15m, 25m, 50m, 100m lengths
- Drip Eze® is a 13mm tube to suit a variety of landscape applications. Use with Australian standard poly fittings.
- Drip Eze® applies water slowly to penetrate the root zone. Select from a range of spacings to suit your requirements.
- Clog minimisation
- Two directly opposed outlet holes minimise chance of clogging. Visible Emitter The clearly visible emitter is easily aligned with plants for targeted watering and can be avoided when cutting through the tube, making it easier to insert the poly fittings.
- Ideal for high density planting areas, intricately shaped landscape beds, and garden beds where overspray cannot be tolerated
- Can be covered with mulch.
- For low maintenance, efficient watering pair with a tap timer or automated solenoid system.
| Tube inside diameter | 12.9mm & 4mm |
| Tube outside diameter | 15.4mm & 6mm |
| Emitter discharge | 2 Lph @ 100kPa |
| Emitter spacing | 30cm |
| Recommended operating pressure | 100kPa |
| Tube pressure rating | 300kPa |
| Roll lengths | 15m, 30m, 50m, 100m (13mm) & 25m (4mm) |
| Colour | Brown |
